Aluminum Squeegee

Aluminum Squeegee
Login or Register For Pricing
Item Code: 

Durometer

   

Our custom-cut aluminum squeegees measure 4.5" tall and 1" thick. We can cut them to any length (minimum size is 3") and include squeegee rubber. We offer single durometer, dual durometer, and triple durometer squeegee blades. Squeegee rubber is clamped in place without the use of glue. This allows the rubber to be easily replaced when worn.

Single Durometer:

* 50 Durometer - Extremely soft.  Great for glitter printing.
* 60 Durometer - Soft.  Great for printing thick ink deposits.
* 70 Durometer - Medium.  All-purpose squeegee rubber.
* 80 Durometer - Hard.  Less ink deposit but better print resolution.
* 90 Durometer - Extremely hard.  Very little ink deposit.

Dual Durometer:

* 70/90 durometer squeegee rubber.  The hard portion of the rubber will prevent the squeegee from over-flexing, making it great for automatic equipment.  Soft print edge.

Triple Durometer:

* 65/90/65 and 75/90/75 available.  Best squeegee rubber for automatic presses.  The 90 durometer center will prevent over-flexing the rubber.   Soft edge on both sides of the squeegee.


 
ELT-S Series

Perhaps you are needing a low temperature ink but you require the softest possible feel for cotton and poly/cotton fabrics.  The ELT-S Series combines many of the ELT Series benefits with a softer and more stretchy finish.  This is the perfect ink for use on all of your fabrics, especially stretchy polyester.

 
 
Franmar Ickee Stickee Unstuck

What printer doesn't know about that "ickee stickee" stuff that builds up on palettes, equipment and even the floor? Well, that's why there is Ickee Stickee Unstuck! One little squirt of Ickee Stickee Unstuck eliminates adhesive build up in a flash. It's also great for cleaning ink spills.

 
 
Franmar One Step Clear

Franmar’s revolutionary Ink + Emulsion Remover is formulated for dip tanks to remove ink and emulsion from screens in one simple step. Efficient, economical, and environmentally friendly, it removes traditional plastisols and UV inks after soaking for only 3 to 5 minutes.