Franmar One Step Clear

Franmar One Step Clear
Login or Register For Pricing
Item Code: 

Size

  2.5 Gallons
  5 Gallons

Franmar’s revolutionary Ink + Emulsion Remover is formulated for dip tanks to remove ink and emulsion from screens in one simple step. Efficient, economical, and environmentally friendly, it removes traditional plastisols and UV inks after soaking for only 3 to 5 minutes. When the solution is ready to be replaced, Franmar’s Neutralizer is a great add in to neutralize the pH for safe drain disposal.

Best Features:

* Long lasting
* Concentrate (add 1 part to 6 parts water)
* Cleans 300 to 600 screens
* Removes any type of emulsion or capillary film

Our Take:

Franmar advertises this product as an emulsion and ink remover.  We love the product.  We do not think any product in the industry does an effective job at removing the ink AND the emulsion.  We would clean the ink out of the screen before placing the screens in the dip tank.  Worst case, scrape the ink out the best you can.

 
20" x 24" Aluminum Pre-Stretched Screens

Our quality mesh counts range from 24 to 330 in white or dyed. These screens are built to last with a solid but lightweight frame, high quality fabric, and a strong frame adhesive. High tension, high quality mesh, will not warp, lightweight, white and yellow mesh, custom sizes available.

 
 
Aluminum Squeegee

Our custom-cut aluminum squeegees measure 4.5" tall and 1" thick. We can cut them to any length (minimum size is 3") and include squeegee rubber. We offer single durometer, dual durometer, and triple durometer squeegee blades. Squeegee rubber is clamped in place without the use of glue. This allows the rubber to be easily replaced when worn.

 
 
ELT Series

ELT stands for "extreme low temperature".  This ink will cure as low as 250ºF for the ultimate energy savings, dye blocking, shrink preventing, and crack resistant ink.  ELT is soft, stretchable, bleed resistant, and very easy-to-print.